Tremor Audio stocks a range of high quality powered amplifiers, including: Wharfedale, DBX and Crown.

Acoustic Guitars

Ukuleles

Bass Guitars

Electric Guitars

Guitar Amplifiers

Effects Pedals

Strings

Guitars Accessories

Guitars

Keyboards

Digital Pianos

Keyboard Amps

Keyboard Accessories

Synthesizers

Keys

Microphone

Speakers

Powered Amplifier

Subwoofer

Mixers

Package

Sound Accessories

Lighting

Recording

Live Sound

Acoustic Drums

Electric Drums

Drum Accessories

Cymbals

Drumming Microphones

Drum Hardware

Drumheads

Sticks

Drums

Saxophones

Trumpets

Clarinets

Horns

Violins

Brass / Strings

Sheet Music

Gift Cards

   Details 
 
 For using in stereo the amplifier delivers 400W RMS per channel at 8 Ohms and 650W RMS per channel at 4 Ohms; a suitable power for small to medium sized complete PA systems. In bridged mode at 4 Ohms the amplifier generates 1600W RMS, perfect for powering a subwoofer integrated into a larger PA system for example.   Maximum headroom audio fidelity and durability are of course vital, whilst additionally we pride ourselves on unbeatable value. The CPD series is manufactured under our strict quality assurance as are all Wharfedale Pro products, making an amp you can trust from price to performance.    Key Features              8 Ohms x 2: 400W RMS   4 Ohms x 2: 620W RMS   8 Ohms Bridged: 1200W RMS   4 Ohms Bridged: 1600W RMS   Class AB Technology   Status and clip LEDs   Thermal, overcurrent, DC and output short protect circuitry           2 x Speakon outputs   2 x XLR outputs to link other audio equipment   2 x XLR inputs   Peak and protect LEDs   Built-in switchable limiter   Continuously variable speed fan   Suitable for small to medium sized venues                  SPECIFICATIONS          Stereo Power Output           8 Ohms x 2   400W RMS       4 Ohms x 2   620W RMS       Bridged Mono Output           8 Ohms   1200W RMS       4 Ohms   1600W RMS       Inputs   2 x XLR       Outputs   2 x XLR, 2 x Speakon       Frequency Response   20Hz - 30KHz       Topology   Class AB...

Wharfedale 400w per Channel @8 Ohms Power Amp

Default Title

   Details 
 
 The CPD1000 is part of Wharfedale Pro’s latest line of professional power amplifiers driving earth shaking audio from the front of your venue, all the way to the back. For using in stereo the amplifier delivers 250W RMS at 8 Ohms and 350W RMS at 4 Ohms; a suitable power for small to medium sized complete PA systems. In bridged mode at 4 Ohms the amplifier generates 1000W RMS, perfect for powering a subwoofer integrated into a larger PA system. Maximum headroom audio fidelity and durability are of course vital, whilst additionally we pride ourselves on unbeatable value. The CPD series is manufactured under our strict quality assurance as are all Wharfedale Pro products, making an amp you can trust from price to performance.         8 Ohms x 2: 230W RMS   4 Ohms x 2: 350W RMS   8 Ohms Bridged: 700W RMS   4 Ohms Bridged: 1000W RMS   Class AB Technology   Status and clip LEDs   Thermal, overcurrent, DC and output short protect circuitry     
 ,    Additional Information 
 
 
 
 
 
 
 
 Brand 
 Wharfedale Pro 
 
 
 Clearance Item 
 No 
 
 
 
 decorateTable('product-attribute-specs-table') 
 

Wharfedale 250w per channel @ 8 Ohms Power Amp

 
 The CPD3600 is part of Wharfedale Pro’s latest line of professional power amplifiers driving earth shaking audio from the front of your venue, all the way to the back. 
 For using in stereo the amplifier delivers 870W RMS per channel at 8 Ohms and 1300W RMS per channel at 4 Ohms; a suitable power for medium to large sized complete PA systems for mobile and fixed installation. In bridged mode at 4 Ohms the amplifier generates 3600W RMS. This huge power means the amplifier can also integrate itself with larger touring rigs and installs where long throw, extremely high power audio is needed. 
  
  Key Features  
 
 
 
 
 
 8 Ohms x 2: 870W RMS 
 4 Ohms x 2: 1300W RMS 
 8 Ohms Bridged: 2600W RMS 
 4 Ohms Bridged: 3600W RMS 
 Class H Technology 
 Status and clip LEDs 
 Thermal, overcurrent, DC and output short protect circuitry 
 
 
 
 
 2 x Speakon outputs 
 2 x XLR outputs to link other audio equipment 
 2 x XLR inputs 
 Peak and protect LEDs 
 Built-in switchable limiter 
 Continuously variable speed fan 
 Suitable for touring, rental and installation 
 
 
 
 
 
  
 Technology 
 Working in stereo, parallel and bridged modes CPD3600 is built for a multitude of sound system formations. Brand new class H topology has resulted in a dynamic, high headroom amp made for propelling your loudspeakers through thick and thin with complete clarity. 
  
 
 Precision Control 
 Large rotary dials accurately adjust gain levels, and you will know when to do so from the clear and simple front panel. A 4 segment led formation displays shows vital power status, level, l...

Wharfedale 870w per channel@ 8 ohms Power Amp

   Details 
 
 The CPD2600 is part of Wharfedale Pro’s latest line of professional power amplifiers driving earth shaking audio from the front of your venue, all the way to the back.   For using in stereo the amplifier delivers 650W RMS per channel at 8 Ohms and 1000W RMS per channel at 4 Ohms; a suitable power for small to large sized complete PA systems. In bridged mode at 4 Ohms the amplifier generates 2600W RMS. This huge power means the amplifier can also integrate itself with larger touring rigs and installs where long throw, extremely high power audio is needed.   
 ,    Additional Information 
 
 
 
 
 
 
 
 Brand 
 Wharfedale Pro 
 
 
 Clearance Item 
 No 
 
 
 
 decorateTable('product-attribute-specs-table') 
 

Wharfedale 650w per channel @ 8 ohms Power amp

   Details 
 
  Wharfedale MP 1800 Power Amp    MP 1800 amplifier is ultra-reliable, high-current power amplifiers designed to work in the most demanding applications. Massive toroidal transformers, automatic, variable-speed fan cooling and a series of advances protection features ensure that MP amplifiers will deliver the ultimate in sonic accuracy under the most rigorous operating conditions.    Features    • Stereo 600W@4 Ohms, 900W@2 Ohms, up to 1,800W@4Ohms Bridged  • Class AB Topology  • Built in toroidal transformer  • Rear panel ground lift switch  • All steel construction  • Continuously variable speed fan  • Sophisticated protection circuitry including; Soft start protection relay; Thermal overload protection; Short  circuit protection; Open circuit protection  • Front controls including: Power Switch, Channel A and Channel B gain controls  • Front panel LED indicators for Power On, Peak, Protect        SPECIFICATIONS     MODEL :  MP1800       INPUT SENSITIVITY :    • AT 4 OHMS 0.775v  • UNBALANCED 1/4" JACK 10Kohms  • BALANCED XLR 20Kohms       CONNECTORS :    • INPUT XLR &amp; 1/4"TRS  • OUTPUT 5 way binding post &amp; speakon or speakon       POWER :  PER CHANNEL (1% THD)   • 8 OHMS 330 Watts  • 4 OHMS 600 Watts  • 2 OHMS 900 Watts       BRIDGED MONO MODE (1% THD)    • 8 OHMS 1200 Watts  • 4 OHMS 1800 Watts       VOLTAGE GAIN :  36dB       SLEW RATE    • STEREO &gt;30v/u sec  • BRIDGED MONO MODE &gt;50v/u sec       CHANNEL SEPARATION :  76dB       SIGNAL TO NOISE (20HZ-20KHZ) :  100dB       DISTORTION (SMPTE-1M) :  less than 0.05%      <strong...

MP4000 P/Amp 1400W Per Side@4Ohm needs 20 amp supply

   Details 
 
  Wharfedale S1000 Power Amp    The new "S-Series" amplifiers are the latest dual channel sound reinforcement amplifier line offering from Wharfedale Pro. The range consists of three models: S-1000, S-1500 and S-2500.   Each model is packed into a convenient, two rack space unit with identical functional layout. Each model offers a different power rating allowing for varied and flexible sound reinforcement applications.   The front panel of the S-Series models provides simple, real-time status conditions with LED indicators for Power, Protect, Bridge, Peak and Signal Present along with convenient operating controls that include a power switch and volume controls for each of the two input channels.   Various mode assignments are provided on the rear panel with easy-to-use MODE SWITCHES that provide assignment options such as signal limiting, low cut filter engagement and frequency selection, stereo and mono input mode selection and output bridging.   Also featured are industry standard XLR and ¼" balanced input jacks along with 4 pin, NL-4 style Speakon™ output jacks and standard binding post output connectors. Multiple wiring output configurations are available.   The S-Series amps are fan-cooled with a cage-protected, rear panel mounted fan that provides adequate air-flow to internal components. An integral AC power circuit breaker is provided on the rear panel and a standard IEC power connector is provided.        SPECIFICATIONS     MODEL :  S1000    INPUT SENSITIVITY :  0.72V / -0.65dBu    INPUT IMPEDANCE :  Balanced: 20kΩ Unbalanced: 10kΩ    VOLTAGE GAIN :  33dB    FREQUENCY RESPONSE :     • 20Hz-20kHz 0/-0.5dB   • 10Hz-40kHz 0/-2dB    OUTPUT POWER :     STEREO :    • 215 Watts per cha...

Wharfedale S1000 Power Amp 350W Per Side @ 4 Ohm

   Details 
 
  Wharfedale MP2800 Power Amp    MP 2800 amplifier is ultra-reliable, high-current power amplifiers designed to work in the most demanding applications. Massive toroidal transformers, automatic, variable-speed fan cooling and a series of advances protection features ensure that MP amplifiers will deliver the ultimate in sonic accuracy under the most rigorous operating conditions.    Features    • High-end power amps with optional bridged mono operation mode  • Built in toroidal transformer  • Rear panel ground lift switch  • Class H Topology  • All steel construction  • Continuously variable speed fan  • Sophisticated protection circuitry including; Soft start protection relay; Thermal overload protection; Short  circuit protection; Open circuit protection  • Front controls including: Power Switch, Channel A and Channel B gain controls  • Front panel LED indicators for Power On, Peak, Protect  • Stereo/Bridge Mode switch on rear of unit        SPECIFICATIONS     MODEL :  MP2800    INPUT SENSITIVITY :    • AT 4 OHMS 0.775v  • UNBALANCED 1/4" JACK 10Kohms  • BALANCED XLR 20Kohms    CONNECTORS :     • INPUT XLR &amp; 1/4"TRS  • OUTPUT 5 way binding post &amp; speakon or speakon    POWER :   PER CHANNEL (1% THD)    • 8 OHMS 600W  • 4 OHMS 950W  • 2 OHMS 1450W    BRIDGED MONO MODE (1% THD) :     • 8 OHMS 1700 Watts  • 4 OHMS 2700 Watts    VOLTAGE GAIN :  <span style="font-size: 13px; line-...

Wharfedale MP2800S Power Amp 950W Per Side @4 Ohm

Wharfedale MP2800 Power Amp 950W Per Side @4 Ohm

Wharfedale MP1800 Power Amp 600W Per Side @4 Ohm

   Details 
 
  WHARFEDALE DW800 POWER AMP     The DW-800 is a 2U dual channel power amplifier designed for both fixed installation and touring applications.    The controls on the front of the DW-800 are simple yet effective with individual channel input trim controls and a power switch. Power, Signal, Clip and Fault LED's on each channel can help identify both normal and abnormal activity. Generous sized filtered air intake vents complete the clear and functional front panel.   The rear panel accommodates power via an IEC receptacle and has high quality audio connections including XLR inputs and through outputs for parallel wiring additional power amps, the main outputs use Speakon™ connectors for reliable and dependable connectivity.    Features    • Switchable stereo and bridged modes  • Individual channel input trim controls  • XLR inputs and through outputs  • Speakon™ main outputs  • Power, Protect Bridge, Signal and Peak indicators  • Variable speed fan cooling system  • Front panel air filters  • IEC AC input receptacle  • Road ready 2u rackmount chassis        SPECIFICATIONS     MODEL :  DW-800    SIGNAL TO NOISE RATIO :   105dB     SLEW RATE :   32V/us     DAMPING FACTOR :   &gt;350     COOLING :   Front-to-rear     POWER ...

Wharfedale DW2400 Power Amp 910W Per Side @ 4 Ohm

Shopping options

.css-1hnz6hu{position:static;}.css-1hnz6hu::before{content:'';cursor:inherit;display:block;position:absolute;top:0px;left:0px;z-index:0;width:100%;height:100%;}Wharfedale 400w per Channel @8 Ohms Power Amp

Wharfedale 400w per Channel @8 Ohms Power Amp